Do you want to collect the well-known coins from all 50 states? Want to know if 2007 quarters are worth anything because you want to buy some. Then our list of faults from the last three months of 2007 will help you.
From 1999 to 2009, the 50 State Quarters Program was held to honor the fifty states that make up the United States. In 2007, the U.S. Mint made five quarters to honor Washington, Idaho, Wyoming, and Utah.
There were a lot of people who used 2007 quarters, but they are only worth what they say on them.
Quarters that look like gems and have never been used can be very valuable, but they are hard to find. You might want to gather mistakes if you want to get 2007 quarters that are worth a lot of money.
If you look at our list of 2007 quarter mistakes, you can see that mistake coins can fetch hundreds or even thousands of dollars. If you know where to look for them, bugs can add a lot of value to your life.
If you have 2007 quarters, you might find a funny mistake called a “partial tilted collar.” It’s a rim mistake that there are clear steps around the coin’s edge.
Also, the planchet won’t fit all the way inside the collar if it’s only half out. This is a mistake. The collar leaves lines along the edge of the coin when the die hits the planchet. You can see this mistake if you look at the coin from the edge.
Most of the time, when the collar is fully stretched, it will make perfect reeds around the coin’s edge. But if the placement isn’t done right, the rim will be flawed and have one or more collar lines stamped on it.
One mistake on a coin’s collar that tilts in part could be worth a lot of money, based on how good it is. This can be seen in the 2007-P Montana quarter mistake with a partially raised collar that sold at Heritage Auctions in 2020 for an amazing $725.
2. 2007-P MS64 Idaho State Quarter With Lamination Bubbling Error
The finishing mistake is another mistake that can be seen in the 2007 quarters series. Lamination mistakes come in many forms, but they all weaken the connection between the copper core and the top coated layer.
When the planchet is being made, if there are flaws in the metal, they can weaken the bond between the clad layer and the copper core. This can make the planchet bubble, crack, or peel. A few of these affects are very strong and cost a lot of money.
This 2007-P Idaho state quarter mistake was sold at auction by The Great Collections for $915 in 2021. It was graded MS64 and had a lamination bubbling error on the back. This is a cool thing to add to your collection of quarters.
3. 2007-D MS65 Double Denomination Error Montana Quarter Struck With A Nickel Die
The 2007 run has a big mistake known as the “double denomination error.” Because of this mistake, two different denominations of money were used to make one coin.
In this case, a Jefferson nickel hits a 2007 Montana quarter a second time. So, the front will look like a normal Washington quarter and have a picture of Jefferson like on the nickel.
The coin is made with the right die the first time, but it is put into a different denomination’s coining hub for some reason. This is called a mistake with two different denominations. One coin has two different amounts on the same side because of this.
What do you think will happen if you mix up two different amounts? It’s possible to win a lot of money by making this mistake. One person paid a crazy $1250 for a 2007-D double value error coin at a Heritage Auctions sale in 2021. A Montana quarter was struck twice on this coin with a nickel die.
4. 2007-D MS66 Utah Quarter Die Chip Error Obv/Rev
There is a die-chip in a lot of coins, which makes it easy to find mistakes. This flaw can be worth a lot, especially on coins that are like gems and have never been used.
When a small piece breaks off and falls off the coin’s surface, leaving a hole that is slowly filled with metal pieces, this is called a die chip mistake. Over time, the metal-filled gap on the die will leave a mark on the coin’s surface.
Die chips look like small, raised bumps on the coin’s surface. Some are put on the coin in strange ways, which makes it more interesting and makes it worth more as a collector. Most of the time, die chips that are bigger, more interesting, or just plain weird will be worth more.
At a sale in 2022, The Great Collections sold a 2007-D Utah quarter that was graded MS66 and had die chip errors on both the front and back for a huge $1035. You should get this coin to add to your set.
5. 2007-P MS65 Washington Quarter Double Struck 90% Off Center Error
The double strike is the next mistake we made. You might find this when you are collecting 2007 quarters. When the same coin is struck twice or even more than once, the design shows up on the same side of the coin more than once. This is called a double struck error.
On the quarter, Washington’s face will appear twice on the front of the coin. The coin makes this mistake when it doesn’t come out of the press all the way, letting the die hit it twice.
Depending on where the coin was when it was hit a second time, different types of double strikes can happen. It’s normal to make the double-struck off-center, double-struck flip over, double-struck on-center, and multi-struck mistakes.
A person on eBay in 2023 paid a crazy $1335 for a 2007-P Washington double struck off-center quarter mistake graded MS65.
6. 2007-P MS65 Wyoming State Quarter Struck Through Grease Error on Both Sides
Another mistake you might find in the 2007 quarters series is the strike-through. Is this right? The coin has the mark of something that hit it by accident on the planchet.
Sometimes a hair, thread, metal, wood, or grease can get stuck between the die and the planchet. This is known as a struck-through mistake.
Some of these things do fall off, but they leave a mark on the coin’s surface. But the thing might stick to the coin’s surface sometimes, leaving a mistake that has been struck through but is still there. This is generally worth more.
In 2022, The Great Collections auctioned off a 2007-P Wyoming quarter that had been struck through grease and was rated MS65. It sold for a huge $920.
7. 2007-D MS66 Utah Partial Missing Clad Error
You might find a metal mistake coin that you need while putting together your state quarter set. It’s known as a “missing clad error” when the cladding on top peels off, revealing the copper core inside.
The top covered layer may come off if there are flaws in the metal when the planchets are being made. There is a chance that one or both sides of the layer will peel off, which could cause a mistake with missed cladding.
If the coin is good, this kind of mistake is worth a lot of money. Coins that have never been used and look like gems usually sell for more. A huge $1,230 was paid for a 2007-D partial missing covered error Utah quarter at a Heritage Auctions sale in 2023.